PicoChip nanospray Columns

Tools  |  Fittings  |  Fused-Silica Tubing  |  Sample Prep


Fused-Silica Tubing

Pre-Cut Tubing

Simplify and improve your analysis with pre-cut fused-silica tubing. No more cleaving and hoping for a clean connection. Pre-cut tubing is professionally cut and polished to guarantee the best possible connection. 360 µm OD tubing is available in four ID sizes and five lengths.

Machine Cut
Machine cut and polished ensures fast, no-fuss, clean connections everytime

Good Hand Cleave
Good technique with diamond scribe or using a rotary cutter produces relatively good cuts

Poor Cleave
Usually results from ineffective scoring of fused silica and/or bending the tubing to "snap" it

Poor Cleave
Crushed tubing results from too much pressure and poor technique or inappropriate cutting tool

Ordering Pre-Cut Tubing

Substitute your desired tubing ID for the ## in the part number when ordering.

OD/ID µm ID µm Length cm Qty Part Number
360 20, 50, 75, 100 6 5 CT360-##-6-5
360 20, 50, 75, 100 10 5 CT360-##-10-5
360 20, 50, 75, 100 15 5 CT360-##-15-5
360 20, 50, 75, 100 25 5 CT360-##-25-5
360 20, 50, 75, 100 50 5 CT360-##-50-5
Pre-Cut Super Pack:
Contains 25 pieces of same size ID; five (5) pcs. each of all five (5) lengths
CT360-##-SP

Stock Fused-Silica Tubing

Fused-silica tubing is essential for making connections from your HPLC system through your source. This high-grade tubing is the same tubing used to produce our columns and tips. Shipped in 2 m lengths, our fused silica is available with a 360 µm OD in four different ID sizes.

OD/ID µm ID µm Length m Qty Part Number
360 20 2 1 RT360-20
360 50 2 1 RT360-50
360 75 2 1 RT360-75
360 100 2 1 RT360-100